Pages

Wednesday, December 27, 2017

WEARABLE CROWNS - VIDEO TUTORIAL - NEW COLLAGE SHEETS & DIGITAL IMAGE SET

Since I’ve been posting so many miniature-themed projects, I thought it would make a nice change to do something completely different.

In this post, you'll find a video tutorial covering how to make four different wearable crowns that range from easy paper crowns to more complicated wire-framed crowns. 
First up is the sparkling Ice Queen crown.  The base of the crown is made from twisted wire accented with silver leaf ribbon and alcohol ink-stained acrylic bead sprays.  The front of the crown is made from a Dresden crown painted silver and loaded with sparkly leaves (from the new Silver Leaves collage sheet) covered in Twinklets Diamond Dust, glitter picks, and wired beads.  
The front of the crown is decorated with flat-back pearl beads, and stamen, rhinestones, alcohol ink-colored acrylic teardrop charms hanging from the bottom, and in the center is a burst of icicles made from mini icicle ornaments.
Next up is the Star crown. 
This simple-to-make crown is created by combining images from the Mini French Labels collage sheet (pictured below).  You end up with a beautiful crown by gluing together several collage sheet images, adding a bit of gold Dresden Zig Zag Edging and Halos, some brass star charms, and star studs. 
Mini French Labels Collage Sheet
Notice how there is a large focal point on the front of the crown and a smaller one on the back. 

For an antique look, there is the Elegant crown.  Just like the Ice Queen crown, the front is made using a Dresden crown.  
Showcased on the crown are images from my Portraiture collage sheet (pictured below).  Additional accents are beaded stick pins, acrylic teardrop charms, and flat-backed pearlsTo purchase the Portrature Collage Sheet, click on the image below.
The crown attaches to the head with a ribbon secured to the front of the crown and is accented with Dresden Rosettes.
Lastly, is the Golden Autumn crown.  The base of the crown is wrapped 18 gauge gold wire accented with white stitched leaf ribbon and white mulberry paper lilies. 
Sprigs of more wire rise from the crown wrapped in gold embossed leaves (from my new Gold Leaves collage sheet), wired pearls, and butterflies.


NEW COLLAGE SHEETS & DIGITAL IMAGE SETS
To complement the crowns, I’ve created 2 new collage sheets and a new digital image set.  These images would work well for any collage project.  Add embossing powder, glitter, Stickles, or Twinklets Diamond Dust to jazz them up.  Make them bendable by attaching them to the wire.

This sheet contains 21 unique silver leaf designs with duplicates in different sizes.  Add Twinklets Diamond dust to give the leaves an icy look, or add silver embossing powder to the edges to give them a shiny accent.  To purchase this sheet, click on the image below.
This sheet contains 17 unique gold leaf designs with duplicates in different sizes.  Add Twinklets Diamond dust to give the leaves an icy look, or add gold embossing powder to the edges to give them a shiny accent.  To purchase this sheet, click on the image below.
This set contains all of the leaves from the Silver and Gold Leaves Collage Sheets and 8 additional copper leaves for a total of 46 leaves.  Each leaf is approximately 3” tall, giving you lots of flexibility in sizing the leaves for your project.  To purchase this digital image set, click on the image below.

VIDEO TUTORIAL


WHITE & GOLD BUTTERFLY

Feel free to download and use the butterfly I used in my crown.



SUPPLY LISTS


ICE QUEEN CROWN
Narrow Gold Dresden Diadem or Crown
Clear Acrylic Bead Sprays - Asymmetrical
Juniper Pick – Silver
Silver Glitter Leaf Pick
Maidenhair Fern Pick - Platinum
Stitched Leaf Ribbon - Silver
Mixed Sized Ivory Flat-Back Pearls
White Pearl Mix In Tin – Threaded on Wire
Clear Mini Icicle Ornaments
10mm Acrylic Teardrop Charms
Large Pearl Stamen - Grey
Flat Back Clear Iridescent Snowflakes
1 Inch Iridescent Snowflake Ornaments
Clear Iridescent Beaded Wired Garland
Twinklets Diamond Dust
Diamond Stickles
STAR CROWN
Mini French Labels Collage Sheet
Gold Dresden Halos
Large Zig Zag Gold Dresden Edging
Fancy Brass Star Charm
Brass Starburst Charm
Flat-Back Gold Star Studs – 8mm
ELEGANT CROWN
Fancy Gold Dresden Diadem or Crown
Metallique Wax – Aged Brass
Mixed Sized Ivory Flat-Back Pearls
Pear-Shaped Pearl Stick Pins – Golds
Pear-Shaped Pearl Stick Pins - White
Fancy Gold Dresden Rosettes
9mm Antiqued Swirl Bead Cap
10mm Acrylic Teardrop Charms 

GOLDEN AUTUMN CROWN
Mulberry Paper Lilies – White
Stitched Leaf Ribbon - White
Large Pearl Stamen - Gold
White Pearl Beaded Wire Garland 

Saturday, November 25, 2017

SANTA'S WORKSHOP DIORAMA & NEW COLLAGE SHEETS

Things are hopping at the North Pole, where Santa’s Workshop is in full swing pumping out toys. 
Everything in this wintry scene is covered in sparkling ice and snow.  In the center is a decorated tree standing on a giant drum.
The elves are loading up Santa’s Sleigh with a bag of toys, chocolate chip cookies, and a cup of cocoa.
The elves use a pull train to move piles of wrapped packages and toys.
If you peek in the windows, you'll see lots of toys and elves at work.
The elves are beginning to round up the reindeer in the grove of trees.
Santa’s doing the last-minute check of his list.

NEW COLLAGE SHEETS
To complement this project, I’ve created 4 new collage sheets, sheets filled with elves, toys, and other things you might find at the North Pole.
 This collage sheet contains lots of elves, Santa in his workshop, candy canes, gingerbread cookies, and more.  Click on the picture to purchase.
 This sheet is packed with toys and games.  Click on the picture to purchase.
 
Toys, toys, and more; this sheet is packed with toys just like the first.  Click on the picture to purchase.
This half-sheet contains things you might find at the North Pole.  Click on the image to purchase.


CLICK HERE FOR THE SUPPLY LIST OF ITEMS USED FOR THIS PROJECT  AT ALPHA STAMPS
  
 THE DETAILS

FAÇADE
The bases of the buildings are made using the Large Haunted House Shadowbox and the Large Haunted House Window Trims.
I painted the roof section white and then covered the bottom area with Chesterville Whitford Scrapbook Paper.  


I also painted the roof trim red and attached it to the facade.  I then coated the roof area with Mod Podge and sprinkled it with white flocking.
I painted the Large Haunted House Window Trims green and the doors red.  
I backed the windows with 12 x 12 Clear Plastic for Windows, then glued the windows to the openings.  NOTE: I also painted the edges of the window openings green before attaching the windows.
I painted the Icicles Roof & Winter Trims white, covered them with Glossy Accents, and sprinkled Twinklets Diamond dust on top.  I then glued them under the windows.
I added white paint to the corners of the windows.  Next, I applied Glossy Accents over the paint and then sprinkled white flocking on the Glossy Accents.
NOTE:  To create ice and snow, I used three products; Twinklets Diamond Dust, Fluffy Snow Flakes, and White Flocking.  These products are somewhat translucent, so it is important to paint the surface white first if you want these products to look white.
I applied Glossy Accents to various places on the facade and in a dripping direction from the top roof trim.  I then sprinkled Twinklets Diamond Dust on the Glossy Accents giving these areas the look of ice and icicles.   Note: this is the only time (papered area of the facade) that I did not paint the surface white before adding the Diamond Dust, as I wanted it to look more like ice.
To the top, I added a Snowflake Border that I painted white and then used Diamond Stickles to accent the snowflakes.                         

SHADOWBOX
Next, I assembled the shadowbox, covered the outside with paper, and painted the inside a cream color.  I suggest using a light color so that once you attach the façade, the opening will be as bright as possible inside.
I added Christmas-themed paper to the inside; this is the same paper I used for the previous Christmas Ornament projectYou don’t need to worry about the paper going to the edges of the cubbies, as you will not see all of the openings once you add the façade.  NOTE:  If you plan to hinge the façade to the shadowbox, make sure the paper and paint completely cover the cubbies.
As noted above, once the façade is attached to the shadowbox, you cannot see all of the areas within each cubie.  It’s important that before you add the toys, figure out what part of the opening shows through the window.  Once I made that determination (by laying the facade over the shadowbox), I added chipboard shelves.
For the toys in the windows, I used both 3D miniature toys and paper toy images from the new collage sheets.
To attach the toys to the cubie/shelf, I used foam tape, pop dots, and flat beads.  Some images are attached to the wall; for some, I added a flat bead and attached them to the shelf.  The 3-D toys are glued to the shelves.
I attached the elves to the front of the shelves.
Lastly, I glued the façade to the shadowbox.

The final touches to the façade are the “Santa’s Workshop” sign, wreath, paper lanterns, and paper soldiers.

SLEIGH
The sleigh is made from a chipboard kit which I painted red and gold.
I cut two pieces of chipboard, one to serve as a ledge on the front and one to accommodate the bag on the back.
To the sides of the sleigh, I added greenery from the collage sheets, metal reindeer from my stash, and a Merry Christmas sign at the bottom of this post (that you can download and use).
The bag in the back is a red velvet jewelry or gift bag.  I stuffed the bottom with tissue paper.  I inserted packages, a gingerbread boy, and a toy sled.
I added a tray of cookies and a cup of cocoa to the front ledge.  I filled the cup with brown paint and then added a dab of white paint to serve as whip cream.

TRAINS
The trains are made from a chipboard kit.  This kit can also be used to create a pull toy.
I decided to connect two pull toys together for transporting toys to the wrapping department and connected three together for transporting wrapped toys to Santa’s sleigh.  Alpha Stamps is carrying all of the cute miniature toys in the windows, on the train, and in Santa’s bag.
Some of the packages are made by wrapping wooden boxes.  The paper I used is from a free wrapping paper collage sheet that you’ll find at the bottom of this post.  I also made boxes from the Holiday Bags, Tags & Boxes Collage Sheet, plus some foil-wrapped gift boxes.


TREE DRUM BASE
I decided that the decorated tree would look great on a drum base.  I started with a round paper mache box and a lid from another box to make the drum.
I painted the middle section red and each lid gold.  To accommodate the ribbon, I added eye pins around the outside of the lids. 
I glued one lid to the bottom of the box and one to the top of the box.  I used a spool on the inside to keep the top lid from sliding too far down on the box.
Lastly, I strung ribbons through the eye pins.


BASES & POLE SIGN
The bases are made by:
·       Cutting shapes from heavy chipboard
·       Painting the shapes white
·       Painting the shapes with Mod Podge
·       Sprinkling Mod Podge with white flocking
I used paper clay to create mounds of snow.  I painted them white and added the flocking the same way I did to the bases.
Next, I glued the clay to the bases, painted them with Mod Podge, and sprinkled them with fluffy winter snow.
I glued the trees to the base and added reindeer from my Winter Wonderland Collage Sheet.  It's easy to add images by cutting slits in the clay mounds and gluing the images in place.
The pole is made from a wooden dowel, painted white, wrapped in red ribbon, and glued into a clay base.  NOTE: I inserted the dowel into wet clay to create a hole for the pole.  Once the clay dried, I glued the pole in place.  The signs are from my Elves in Santa’s Workshop Collage Sheet and have clear mini icicle ornaments dripping from them.  At the top is a Tim Holtz Salvaged Santa painted with acrylic paints.


FREE IMAGES
Feel free to download the images below and use them in your projects.