-->

Welcome

I love answering your questions. If you ask them in the comment section, I have no way to answer you (if you haven't heard from me, that is why). If you use the "EMAIL ME" in the left column of this page, I will be able to respond to you. You can also use it if you want to be added to my newsletter. Laura

Saturday, May 26, 2012

Mermaid Sand Castle Book and Metal Fish Tutorial – Designed for Alpha Stamps

Sit back and hold on cause I’m going to throw a lot of eye candy, products and how to’s at you in this post.  You can click on the pictures to see them in more detail.

I had a blast designing this Mermaid Sand Castle book for Alpha Stamps.  The pages are made out of quality press boards and the package comes with four different pages.  To give the pages the look of a sandcastle, I first sprayed the front of each page with a product called Stone Touch by Plasti-kote.  It comes in a spray can and can be found at hardware and paint stores.  The product comes in several different colors and finishes.  Here is a link to their website.  http://www.plasti-kote.co.uk/Product/pcode---4651/pccode---3620.  The company is based in the UK and their site has information on where you can buy the product in Europe.  I’ve had my can for a while so I don’t remember where I bought it in the US.  Krylon also makes of line of textured spray paints called “Make it Stone!”.  The Krylon product gives you the same result and should be easy to find in stores or online in the US and Canada.  Here is the link to Krylon’s website http://www.krylon.com/products/make_it_stone_textured_paints/
Front Page Spayed with Stone Touch
End Result
Close Up View of the Texture – It really feels like sand.
I used the sand treatment for the fronts of the pages and paper for the backs of the pages.
View from the Back of the Book
Pictures of the Book Open
GLUE: To attach all of the elements to the pages I used either Tombo Mono Multi glue or Glossy Accents. 
Next, I’ll walk you through the design of each page with a list of the Alpha Stamps products that I used.  Lastly, I’ll cover the design, construction and colorizing of the fish you see on all of the pages.
First Page Front – The Castle Gate
In the background you’ll notice brown vines.  They are made of a mixture of glitter, microbeads and mica flakes.  I’ve used this same treatment with different color mixtures on other pages.  Note the fish over the entrance.  The fish is assembled using various pieces of metal.  On each page you’ll notice other fish I created using the same technique.  I’ll be walking through in detail how I create the fish. 
 Alpha Stamp Supplies Used on the Page Pictured Above (except for the metal fish)
Brass Shell Scroll – Over the Window
Travel Adhesive Borders-Shells at the bottom
Acrylic Flowers in Tin – At the bottom
Gold Zig Zag Dresden Borders – Around the windows and doors
First Page Back – The Castle Gate
Alpha Stamp Supplies Used on the Page Pictured Above (except for the metal fish)
Travel Adhesive Borders-Shells at the bottom
Gold Zig Zag Dresden Borders – Around the windows and doors
Second Page Front – Mermaid Garden
On many of the pages you’ll see sparkly and dimensional underwater plants, coral, etc.  In the fall Michael’s Craft store carries glittered and beaded sprays for Christmas decorations.  The sprays come various colors. Sizes and shapes and are very inexpensive.  I always purchase several each year as I think they are perfect for coral and underwater plant life.
Alpha Stamp Supplies Used on the Page Pictured Above (except for the metal fish)
Travel Stamps Varnished Paper – Paper sea shells
Violet Dahlia Resin Flower Set – Flowers at the Bottom
Second Page Back
Alpha Stamp Supplies Used on the Page Pictured Above (except for the metal fish)
Travel Stamps Varnished Paper – Paper sea shells and seahorse
Third Page Front – The Queen’s Chamber
The throne is a piece of lace.  I use a lot of flowers in my art.  I typically cut off the wire stems (which I save).  To create the seashell arrangements at the top I glued the wire stems in the seashells.
Alpha Stamp Supplies Used on the Page Pictured Above (except for the metal fish)
Large Game Spinners - Tips of the trident
Copper Colored Cone Filigree - Holding the seashell flowers
Third Page Back – Treasures of the Sea
The blue beaded net is a flapper hat that I catabolized.  My friend Betty Drake gave it to me as she knows I will use just about anything in my art.
Alpha Stamp Supplies Used on the Page Pictured Above (except for the metal fish)
Travel Adhesive Borders-Shells at the bottom
Acrylic Flowers in Tin – At the bottom
Forth Page Front – Temple of the Sea Goddess
The translucent fish trimmed in gold are stickers.
Alpha Stamp Supplies Used on the Page Pictured Above (except for the metal fish)
Forth Page Back – Lair of the Sea Witch
The brown and green large chunky looking pieces at the bottom are sea glass.
Alpha Stamp Supplies Used on the Page Pictured Above (except for the metal fish)
Acrylic Flowers in Tin – At the bottom
How the Book is Bound
To bind the book I used green and purple seem binding ribbon. I love using this ribbon as it has the look and feel of silk and is sturdy and thin.  Alpha Stamps carries a large selection of colors.  I laced the pages together just like you would lace a pair of shoes (crisscrossing the ribbon through the holes.)
Tutorial - Creating Fish from Metal Bits and Bobs and How to Emboss Metal and Plastic
I love making these fish out of bits of metal and plastic findings and charms.  To me they look like a piece of jewelry.  I started making these fish last summer after I came up with the Steampunk Owl.  It worked so well for the owl I thought it would also work for fish.  There are all sorts of unusual looking fish in the sea so let your imagination run wild.  The way I approach designing the fish is to deconstruct the body and to look for metal bits for each of the parts of the body.  The parts you need are something for the:
  • Head
  • Other bits that might stick out of the head or some other part of the body.
  • Core of the body
  • Tail
  • Fins
In the picture below you can see the metal bits I chose to use in the design of the fish.  I start by laying the fish out and then I take a photograph.  Since I will be texturizing and colorizing the fish with a variety of products, having a photo helps me remember how to glue the fish together.
BEFORE AND AFTER
Alpha Stamps Products Used In the Fish Pictured Above:
Florentine Brass Leaves – Accent on the head
Tamar Deco Drop – For the Tail
Alpha Stamps Products Used In the Fish Pictured Above:
Tiny Brass Leaves – For the bottom fins
You can see in the case below I decided to change the design slightly when I assembled the fish.
Alpha Stamps Products Used In the Fish Pictured Above:
Coloring and Decorating the Fish
I used a variety of products to change the color of the metal and plastic; Ranger Alcohol Inks, Liquid Pearls Pearlescent, Lumiere Metallic Acrylic paints, Ranger Vintaj Patina for Metal, glass glitter, and embossing powder.
Ranger Alcohol Inks
If you just want to change the color of the metal but have the metal look still come through the color then use the Ranger Alcohol Ink.  One thing to remember is that the color of the metal will influence the color the painted metal takes on.  In other words the after applying the ink to the surface, the metal will not be the exact color it is in the bottle.
On the fish picture above, the tail, body, fins and eye, are painted with Ranger Alcohol Inks.
Alpha Stamps Products Used In the Fish Pictured Above:
Heart Leaf Charms – For the head
Antique Silver Fan Charm – For the tail
Small Angel Wings – For the fins
If you want to cover up the some or all of the piece but still have a metallic or a pearlescent look then use Liquid Pearls or Lumiere Metallic Acrylic paints.  How much of the metal you see will depend on the number of coats you apply.  Alpha Stamps carries several of the most popular colors of Liquid Pearls
I used Ranger Alcohol ink to color the rhinestones.
Alpha Stamps Products Used In the Fish Pictured Above:
Brass Branch wit 6 Leaves – For the Tail
Baroque Scroll with Loop – For the head
Ranger Vintaj Patina for Metal
If you want to cover up the color of the metal and achieve an enamel look then use the Ranger Vintaj Patina for Metal.  In the picture below, the tail, the body and the eye of the fish are painted with Cobolt blue Vintaj Patina.  The paint goes on very smooth and dries quickly.  There are some really cool things you can do with this product that I will cover in a future post. 
Alpha Stamps Products Used In the Fish Pictured Above:
Florentine Brass Leaves – For the top fins
Filigree works great for the body of the fish.  Some of the filigree that Alpha Stamps carries that would work well for the body are:
Glass Glitter
For the fish below, I used glass glitter on the shell head and the bottom fins.  I purchase my glitter from the Art Glitter Institute.  They also carry their own line of glues to apply glitter to just about any surface.  One of the things that I love about their glue is that the bottle comes with a tiny steal tip which allows you to apply the glue precisely in very small areas.
Embossing Powder
One of the ways I decorated the fish was to emboss the metal.  It’s really easy to do.
What You’ll Need
Versamarker
Embossing Powder
Heat Gun
The folks who make VersaMark embossing pads also make a marker version which works great for embossing small embellishments like metal and plastic pieces.  The marker has two different sized tips.
Using the VersaMark Marker apply the embossing solution to the areas that you want to emboss.  You can coat the entire surface or just parts of the surface.
 Sprinkle embossing powder on the piece.
Shake off the excess embossing powder.
Melt the embossing powder using a heat gun.
WARNING:  The plastic and metal gets very hot.  You need to give it time to cool off before you touch the piece.
If you missed a spot, want thicker or more area’s embossed repeat the steps above.  If you only want certain areas to have embossing powder, DO NOT pour more powder over the piece when it is hot as the powder will stick to the entire surface.
In the examples below I only embossed the starfish on the shell.  I used the smaller of the two tips on the marker to apply the solution.
TIP:  Sometimes static electricity will cause the powder to stick to areas to which you have not applied the VersaMark solution.  There are various anti-static powders on the market that you can apply first.  This works great if you are using a rubber stamp to apply the embossing solution but doesn’t work in this situation.  If you apply an anti-stick powder first the powder will end up gumming up the tip of the marker.  I recommend using a paintbrush to knock off the excess powder.
In the picture below the fish’s tail, fins and head has been embossed.
Alpha Stamps Products Used In the Fish Pictured Above:
Stamped Flourishes – For the tail
Antique Brass Leaves – For the fins on the top
Small Angel Wings For the fins on the bottom
Ornate Brass Teardrop – For the head
Alpha Stamps Products Used In the Fish Pictured Above:
Stamped Flourishes – For the Tail
Alpha Stamps Products Used In the Fish Above:
Brass Nouveau Leaves – For the fins
Brass Shell Corners – For the head
Ranger Alcohol Inks - For the Tail
Pieces that are square or triangular shaped work well for faces.  In addition to the pieces I used Alpha Stamps also carries these items that would work well for faces:
Mica Flakes and Other Mixes
To fill in the body of some of the fishes I used mica flakes or mixes of microbeads, mica flakes and glitter.
 Alpha Stamps Products Used In the Fish Pictured Above:
Antique Brass Leaves – For the tail
Fancy Fleur Drop – For the head
For this fish, I first glued mica flakes to a piece of cardstock in an area slightly larger than the pieces.  Next, I glued to piece to the mica flakes.  Lastly, I carefully cut away the excess paper/mica flakes.
Gilders Paste –Patina
Another option to color metal and plastic is Gilder’s Paste (Alpha Stamps also carries black and copper).  This stuff has the feel of shoe polish (but is a little stinky).  I typically use my finger to apply it to the piece if I want just the raised areas to have color.  You could also use a paintbrush for full coverage.
Assembling the Fish (Glue)
Once all the bits and bobs are decorated I glued all the pieces in place using E6000 glue.  This glue is super strong and works really well with non-porous surfaces like metal and plastic.  This is very important for a project like this as some of the glue points are very small (i.e. gluing the fins to the body).

Stay tuned as after I completed this book I took it apart and made something completely different.  I want to assure you that in the process no art was removed or damaged and new things were added.  I hope you will be excited to see what I created.  I wanted to give you another idea of what to do with a book like this.  I’ll be posting what I did in a couple of days.  This post is long enough! 

40 comments:

bobbie said...

Oh.My.God!!!!!!!!!!!!!!!!!
This is BEYOND amazing ~ stunningly, breathtakingly,wonderously beautiful!
The amount of detail in this is just staggering!

But then I came to those heart-breaking words ~ "I took it apart"!!! Because I was all set to Email you and offer an obscenely huge amount of money for it!!
Waaaaaah!!

***sigh*** I shall try to be patient while waiting to see what else you come up with using the *sob* various parts of it ~

Martina said...

Good heavens! This is a magnificent work of art, Laura! Something like that is priceless and made ​​with so much love! I'm really speechless ..

Daniele said...

I'm speechless your talent knows no boundaries.......wow wow wow
hugs

Tarnished Rose said...

You have really outdone yourself this time. AMAZING! I'm gobsmacked by your creativeness and ingenuity. I'm utterly speechless (in a very good way).

Smiles~
Marilyn

Marilyn said...

OMG OMG OMG ... I can tell I am not the only one who is speachless...you make me dizzy!

Seahorse Ranch Girl said...

Call 911!

Janet Ghio said...

This is just gorgeous!!

Jennifer said...

when i opened your email a little while ago my jaw dropped! i was in pure yummy delight as i saw your creation. the time and creativity you've poured into this project is much admired and appreciated. the detail, right down to the fishies, is breathe-taking!! thank you so much for bringing smiles and enjoyment to my days!! it is definitely appreciated.

Céline said...

WOW!!! Stunningly beautiful!!! I can only hope that your new project you made with this book is more gorgeous than this one, because I absolutely love this one!!!

cathy said...

Wow! This piece is really over the top and just gorgeous. How could you bear to take it apart?

Redanne said...

I am just picking my jaw up off the floor - this is beyond stunning, a true piece of art! You are one talented lady.

Holly M said...

I was literately holding my breath while I read this post. How does one comment appropriately on a piece of art work so intricately beautiful. I will say it is creative, beautiful, fantastically fanciful, and downright dreamy, but read it as 10 times that!

nelda said...

OUTSTANDING! I am going to savor the details in this for some time. I just finished ONE mermaid sea scape and it took ages to glue everything on. Your creation is total awesomeness!!!!

Nichola said...

Epic.

Catherine SIWCZAK said...

there are no words for this ! Incredible, faulous, unique !!!!

Cameron said...

Each page is a masterpiece....the whole book, an absolute magical Wonderland for the senses!!

This is just beyond gorgeous!! The colors, the names of the pages, the images....and those brilliant, one of a kind fish!!

I am in awe!!

MISS PEACH ~(^.^)~ said...

If I were a mermaid, I would want to live in your artwork!
Karla

birdnest said...

Once again Laura, You have Outdone Yourself! WOW, What a Fantastic work of Art! The Fish are gorgeous, can't wait to make some...Thank you for sharing...Robin

theresa martin said...

Great tutorial for a beautiful and complex piece. Well done Laura!

DonnaMundinger said...

I'm SPEECHLESS! I can't even begin to tell you how utterly fabulous this is. you are totally AMAZING! Now I have to go back and feast my eyes some more. xxD

EKDuncan said...

This is awesome, crazy, cool!!!

- Evelyn

Elaine A said...

Holy Moly Laura! This is a feast for the eyes, a masterpiece! You have truly outdone yourself! I absolutely love this gorgeous piece of art. I love mermaids, and this is a plethora of mermaid love!! AMAZING!!!

Elaine Allen

Createology said...

Breathtakingly Beautifully Amazing! Speechless over your creative talents...

Victoria said...

This piece is so masterfully done. It must have taken quite a while! You are awsome my friend! This is why I come to your site when I need a little inspiration! Nice Work!!!!!!!! :)You have outdone yourself!

Hester said...

Laura, This is your best ever piece! But I always say that...the fish are just incredible!!

Love the whole piece... many, many thanks for sharing!

Rhea said...

Really inspirational! I love the subject matter and the fish are so creative and lovely. Job well done!

Theresa said...

wow. This is amazing. I can't stop looking at it! The fish are so beautiful!! Thank you for sharing.

Sue Young said...

Only YOU would take this fabulous creation apart!!! OH.MY. GOD!!!!!!!!!!!!!!!! Sob.
An unbelievable creation Laura!!!!!

Kathryn said...

It as taken me two days to catch my breath since seeing this!! There are no words big enough (even in caps) to describe how beautiful this piece is!!!! I have studied every picture, I am blown away by the detail and imagination you put into it!!
Thank you so much for sharing your unbelievable talent with us!!
xo
kat

Jackie said...

You Laura, are just incredible! and that's all I have to say about that!!
(only cause' everyone has already said everything that would spill from my drooling mouth LOL)
xoxo Jackie

Unknown said...

Quel magnifique travail, de précision, de couleurs, d'agencement et du choix des embellissements. Je suis en admiration et je suis complètement "tombée amoureuse" de tes réalisations, bravo à toi.

Donna in Louisiana said...

Oh My Word!!! Laura, this a breathtaking!!! I'm off the transfer some of these techniques to a Shadowbox frame for a photo of a mermaid to go in our Themed Mermaid room at our retreat house. Thank you so much for always being such an inspiration to me and for graciously sharing your artwork and techniques. You really make me think outside of my comfort zone.

Hester said...

Hi Laura, I had to come back and take a second and third look to make sure it was real and it is!!

Hester said...

Hi Laura, I had to come back and take a second and third look to make sure it was real and it is!!

deb said...

that is absolutely beautiful! And the work! and perfect for my sea obsessed sister! i was going to make a fairy garden..but this would be cute set in a fish bowl! Smaller of course!thanks for the tutorial..need to go shopping
now!

Kathy said...

I have never seen anything so beautiful!!! I would have to win the lottery to be able to buy the supplies used here. Oh dear, I wish it were mine.

Vicki Romaine said...

This sand castle is absolutely amazing. I can't believe what all you have done. A recent friend I met in person, Georgia Horn, showed me one of your ATCs that she won from you. It was wonderful too. You have a new admirer nand I've got to go back and read everything you have said about your sand castle.

Joyce Ann said...

Okay, this is just insanely gorgeous!!!! Thank you so much for sharing your technique. I am truly inspired.

SusanLotus said...

Stunning creations! I get surprised everytime I enter your page because you always come up with so beautiful artwork!
<3

Beth said...

This is beyond anything I could imagine. I love all your techniques, but the fish are amazing!