-->

Welcome

I love answering your questions. If you ask them in the comment section, I have no way to answer you (if you haven't heard from me, that is why). If you use the "EMAIL ME" in the left column of this page, I will be able to respond to you. You can also use it if you want to be added to my newsletter. Laura

Saturday, January 11, 2014

Off to the Park Victorian Diorama with Tutorial

This diorama showcases a lovely Victorian lady leaving her home perhaps to meet a friend in the park.  You can see that she is standing outside a door pulling on her gloves.  Her lovely parasol (made from a doily) is leaning against the column waiting for her to pick it up.  The overall size of this piece is approximately 13 ½” x 4 ½” which includes all of the embellishments.

You all know I love creating dioramas and of course I’m always looking for different methods and materials to use.  If you love them too but have been thinking that they are too complicated to construct, I hope this project changes your mind.
The the base of this piece is nothing more than a box and some paper.  Yep, that is all it is.  The rest is just glue and embellishments.
In the tutorial below I walk you through how easy it is to create a diorama using a paper mache box and decorative paper.  I’ll also go over all of the embellishments I used and how I created the Victorian woman’s skirt and doily parasol.
Assembling the Basic Structure
The base of the piece is made from 4”x4”x2” paper mache box.  I covered all of the surfaces of the lid of the box and the outside of the bottom of the box with decorative paper.  I also inked all of the edges.  There is no need to cover the inside bottom of the box as you will not see it.  Of course, painting the boxes is also an option
Next, I cut out pieces of decorative paper to serve as the supporting back and sides.  To determine the size of the paper, I used the finished size of the paper Victorian doll (which is 7” tall) plus some extra headroom (3 ½”) for the height.   To determine the width of the paper I used the outside measurement of the bottom of the box (4”) plus 1 ½” for each side of the box for a total of 7”. 
The end result was that I cut two 10 ½” x 7” pieces of decorative paper and glued them together mindful of which designs I wanted to expose on the inside and the outside.  Next, I scored and folded two lines on the paper 1 ½” from the long edge of the paper.  This will make it easier to glue the paper to the box.
I then glued the paper to the outside bottom of the box.  If you are going to decorate the inside of the paper you might find it easier to add your embellishments before gluing the paper to the box  Note that the paper only wraps partially around the box.  This will create support for the lid (which will be the top) but allows the base of the box to be exposed so that you can see the items inside.
The top of the paper is then glued to the inside of the lid of the box creating the top.  I also glued a wooden dowel in place at the same time as attaching the lid.  The dowel is used to create more visual interest and to add more support to the top.  I painted the dowel cream color paint and wrapped it with seam binding.  At the ends of the dowel, I added pieces of decorative paper.  To determine the length of the dowel, I measured the distance between the top of the base to the top of the paper that is attached to the base.  In the case of this piece, it measures 8 1/8”.  
In the picture below you can see the lid attached to the top of the paper (note the paper is inside the lid) and the dowel is attached to the base and to the inside of the lid.  That’s it; you have a basic diorama structure!
Of course, there all kinds of embellishments that you can add to the basic structure.  Based on what you plan to add, you might want to attach it before or after you assemble your structure.
To the top and bottom, I added images of lace printed on transparency sheets.  I used brass pieces to finish the edges.  To the top, I added a clock from my Tick Tock Collage Sheet and framed it with a circular brass piece.
On the inside edge I added a chipboard corner scroll painted with Ranger Picket Fence Crackle Paint.  I cutout a door from one of the decorative papers and attached it to the inside, popping it out slightly with the use of double stick foam core tape.
On the back I added another image from the decorative papers.
Making the Skirt
Since the image I was inspired by had only the top half of a dress, I needed to create a skirt.  First, I set out to make a bustle from a paper doily.  I inked both sides of the white doily with Tumbled Glass Distress Ink and cut the doily in half.
Starting with 1/2 or the doily, I folded the doily in half.
I folded the doily in half again.
I folded the doily one last time.  The doily is now folded three times.
Next, I unfolded the doily.  The purpose of the folding was to create fold lines to make it easier to accordion fold the doily.  Folding it first created equally spaced fold lines which would have been hard to make if you tried to accordion fold the doily with no fold lines.
I started accordion folding the doily starting at one end using the pre-folded lines as a guild.
Continue accordion folding the doily along the guide ines until you reach the end.  You should end up with a half doily that looks like the picture below.  I repeated the same process for the 2nd half of the doily.  
Next, I made panels for the skirt.  
I started by creating a template made from lightweight chipboard.  Below is a scan of the template I used.  Feel free to download it and use it if you wish.
Using the pattern, I cut 5 panels from various patterned paper and glued the panels together.  In deciding on their placement I used the bottom of the bodice as my guide.
Next, I attached the paper doily bustles to the panels again using the bodice as my guide.
To decorate the bottom of the skirt I used two pieces of different colored tulle netting gathered by wrapping thin wire around the tulle.  I made the spaces between the gathers wider on one piece of tulle than on the other piece of tulle.  The difference in spacing was because the wider-spaced tulle was going to be placed on top of the other piece of tulle and I wanted it to puff out more.
I attached the darker or shorter piece of tulle by gluing down each wrapped wire and then gluing the rough ends behind the skirt.
Next, I glued the longer tulle piece on top of the shorter one in the same manner.  I used paper roses to add more decoration and to cover the wire.
In order to attach the woman to the base of the diorama, I glued flat toothpicks to the bottom of the skirt.  I also glued additional paper panels to the back of the skirt to support the toothpicks and to hide the rough edges of the tulle.
Making the Doily Parasol
After playing with the doily to make the bustle I decided it would make a lovely parasol.  First, I folded a full doily in half, then in half again 3 times which was about as many times as you could fold it.
Next, I opened up the doily and used the fold lines as a guide to help me accordion fold the doily (just like with the bustle).  Just pick a place to start and keep folding until you come full circle.
To jazz up the parasol, I used tiny ribbon bows.  The handle is a wooden skewer and the end is a brass box foot that just happened to fit the skewer perfectly.  When gluing the handle to the doily I pinched the bottom of the doily to the skewer and glued it in place inside.  This helped keep the parasol partially closed.
Finishing Touches
Whenever I’m working on a project and I’m almost finished I invariably decide that it needs more touches here and there.  In the pictures below you can see that I decided to add a chipboard foliage piece accented with a piece of brass filigree behind the clock.  I also glued tulle to the top and wrapped it around the column.  At the point of attachment, I wrapped a brass leaf and bird piece around the column.
Using the box lid for the top of the diorama provides a great place to hang stuff as you see with the birdcage below.  At the base of the piece, I added rondelles threaded with two different colors of seam binding.  I also added gold metallic Dresden to the top and bottom to trim up the pieces.

I poked holes into the bottom of the box to accommodate attaching the lovely Victorian lady.  I used a very liberal amount of E6000 glue underneath the box to keep her in place.
I hope I have demonstrated to you how easy it is to create the base for a diorama that can be customized for any theme and that you are ready to create one for yourself!

18 comments:

Unknown said...

Gorgeous Laura! Nice Tutorial, thanks.

Anonymous said...

Absolutely STUNNING!!! Wonderful depths of creativeness here. Thanks for sharing such a beautiful piece. Karen.x wintonrosepapercreations.blogspot.com

Jo said...

Amazing!!!

Karen Mallory said...

What a wonderful piece! Thanks for the tutorial!
hugs Karen

johala said...

Hello Laura
Thanks for your kind last comment.
I'm allways amazed by your creativity!!! Thanks a lotfor all these idea you share on your blog!
Hugs and kisses xxxx

claude said...

un ensemble élégant, merci pour les explications

Martina said...

Again a very extraordinary and wonderful creation, dear Laura! Super idea and beautifully designed. Love it!
Have a wonderful weekend.
Hugs MARTINA

Birgit said...

So very beautiful, Laura! :)

Hugs,
Birgit

Dorthe said...

Laura, this is extraordinaerely amazing and beautiful.
You are such s fantastic artist.
Thank you for the tutorial, dear.
Hugs,Dorthe

Theresa said...

This is really something!! It amazes me how you take a bunch of paper and a few images and turn them into something really beautiful! Lovely!!!

RJ said...

LOVE!!! Thanks for sharing!

Deb said...

Laura, absolutely stunning! Thank you for sharing this great tutorial, Deb

Maureen said...

Wow, Laura another great project! You are so talented with dioramas especially... this makes me think of Gone With The Wind! Very pretty!

Ms Misantropia said...

Beautiful!

Diane at Craftin Your HeART Out! said...

Amazing, Love this piece!! Thanks again for another fantastic tutorial.

Happy New Year to you!!

Take care,
Diane

Cocofolies said...

Wow Laura, fantastic work!!!! I love all the details of this new amazing project... The dress of the lady and her umbrella are just awesome, and a huge thank you for the great detailed tutorial! Hugs Coco xxx

dyeandpigment said...

This is great. Thanks so much for sharing the tutorial.

Kerstin F. said...

Stunning, great project and thanks so much for your tutorial.